What is a Cable Cleat?

betway东盟体育必威东盟体育平台有线夹板是设计和测试的设备，以确保电缆的保留和支撑，并已在世界各地使用多年。

It was not until 2003 with the emergence of the standard EN 50368, that any standard for cable cleats existed. This not only highlighted the retention and support that cable cleats provided to cables, but more importantly highlighted the protection of the cable management system and the potential risk to human life without the use of cable cleats. Prior to EN 50368 both cable and cable cleat manufacturers provided testing to their own standards.

This was then followed up with the publication of IEC 61914 in 2009 and superseded by a new standard in 2015 which further highlighted the importance of cable cleat products, and correct cable cleating.

IEC 61914 -Cable Cleat

‘Cable cleat’ according to IEC 61914 defined as:“A device designed to provide securing of cables when installed at intervals along the length of cables.”

“Note: A cable cleat is provided with a means of attachment to a mounting surface but does not rely on an unspecified mounting surface for the retention of the cables. Examples of mounting surfaces that may be specified are ladder, tray, strut, or rail, wire and beam. Where declared, cable cleats provide resistance to electromechanical forces.”

查看我们full range of cable cleats今天，或者如果您更喜欢，请致电+44 191 265 7411与我们团队的成员交谈。

Intermediate restraint

IEC 61914：2009的“中间克制”定义为：

‘cable retaining device to be used with cable cleats to hold the cables together in order to provide resistance to electromechanical forces. Intermediate restraints are not attached to the mounting surface.’